Fluidic Techniques ASME PTC-6 Flow Nozzle Test Sections are manufactured in strict accordance with the ASME PTC-6 Code. These critical meters are used during turbine acceptance testing in power plants to measure feedwater flow or condensate return flow. Fluidic Techniques has successfully designed, manufactured and tested over 300 of these meters for the power industry.

Typical materials of construction are Carbon Steel pipe and flanges, 304 SS Nozzle and 304 SS Flow Straightener. Other materials are available upon request.

Model CFS Designed for measuring condensate return. The meter consists of precision bored pipe, a low beta Throat Tapped Flow Nozzle, a 52 tube straightening vane or a Translineal Flow Straightener and differential pressure connections. The ends and nozzle are flanged. A diffuser cone is optional. The complete Flow Nozzle Meter Run is transported to a hydraulic laboratory recognized by the ASME PTC-6 code committee for calibration.

Model STS Designed for measuring feedwater flow. The meter consists of precision bored pipe, a low beta Throat Tapped Flow Nozzle, a 52 tube straightening vane or a Translineal Flow Straightener, a diffuser cone and differential pressure connections. The ends are beveled for welding and the nozzle is welded in place. An integral inspection opening is provided. The complete Flow Nozzle Meter Run is transported to a hydraulic laboratory recognized by the ASME PTC-6 code committee for calibration.

 
Fluidic Techniques Division of FTI Industries, Inc.
1213 Antlers Drive, Mansfield, TX 76063 USA
Tel: (817)473-4481 • Fax: (817)473-6318